How to Change a Generator Spark Plug (When and How) — 2027
How to change a generator spark plug: gap specs (usually 0.028-0.031 in), replacement every 100 hours or yearly, and a 15-minute step-by-step.
How to change a generator spark plug: gap specs (usually 0.028-0.031 in), replacement every 100 hours or yearly, and a 15-minute step-by-step.
How to winterize a portable generator for storage or winter operation: fuel, oil weight, battery, and the monthly-run routine that prevents spring surprises.
A 13,500 BTU RV AC needs 3,000W minimum — or just 2,200W with a soft start kit. Full sizing guide with real amp measurements.
Generator oil change intervals: break-in at 20-30 hours, then every 100 hours or 6 months. Brand charts, severe-duty schedules, and oil types explained.
Small 120V MIG welders need 3,000-5,000W; a 200A welder needs 8,000-12,000W. The 2-3x sizing rule explained with real examples.
A neutral bonding plug is a $5 DIY fix for floating-neutral generator problems: GFCI trips, EMS errors, and surge protectors that won't pass. Here's the build.
Do you need a grounding rod for a portable generator? For cord-and-plug use, usually not — NEC 250.34 says so. Home backup wiring is a different story.
Wondering if you can parallel two different generators? Physically possible with inverter models, but no manufacturer approves it. Here is what actually happens.
An air compressor surges 3-5x its running watts at startup. A 2 HP shop compressor needs a 6,500-7,500W generator — here's the math.
A 2,000-3,000W generator runs most window ACs. Match your BTU to our sizing table and size for starting watts, not running watts.